Home | Reviews | Underwater Photography | Underwater Cameras

Sea and Sea DX-2G Underwater Cameras

3/5

(2 Reviews)

Write a review

Where To Buy
Specifications

Product Description

DX-2G Camera and Housing Set. High-quality model with 12.1 effective megapixels that continues the G concept of extensive yet subtle expression range.

Review Options: Sorted by Latest Review | Sort by Best Rating

Reviews 1 - 2 (2 Reviews Total)

User Reviews

Overall Rating:

Value Rating:

Submitted by izhak a Expert

Date Reviewed: April 29, 2012

Strengths:    awesome image quality
great screen
special function
great shutter
that is great! camera

Weaknesses:    i wish she have larger sensor

Bottom Line:

i have this camera for 5 months and i happy for buying it .
i looked for great image quality ... and i search 1 year and then i see this camera....
this is great camera for underwater and also for forest and nature . this is great camera !!!

Expand full review >>

Overall Rating:

Value Rating:

Submitted by regscully a Intermediate

Date Reviewed: February 14, 2010

Bottom Line:

One of the first things I noticed after assembling the camera and housng for the first time, was that there seemed to be inadequate pressure on the camera mode selector from the housing actuator dial. The hard rubber conical gear makes contact with the edge of mode selector on the camera and there appears to be a certain ammount of slippage taking place between the two. I have attempted to improve the contact pressure between the two with some additional foam rubber spacers on the bottom of the housing which seems to improve things a little.

I would imagine that over time the small amounts of slippage that occur will cause the actuating grommet to wear and increase the slippage.

My concerns were referred to the designers / manufacturers through the local agent for the camera set. The reply was that under pressure the actuating gear will excert more pressure on the mode selector and increase the contact pressure. I found that there is hardly any vertical play in the actuator mechanism for this to happen and I did not notice any improvement in contact pressure at depth.

The agent sent me another camera set, however the same defect was evident.

Does anyone else out there with more experience with this camera have the experience. ? Is this a design floor ?